The Tesla Crop Glyph Tapping the Transdimensional Wheelwork of Nature by M.G. Whitney

The AIR has 3 inputs and 3 outputs.
 |
The crop glyph shows a spiral where the conductive receiving body of the rectenna was, this spiral forms the base of the transistor. The spiral is a scroll electret – an electrostatically, permanently charged dielectric. The original receiving body was also a dielectric. The function of the scroll electret is to produce IEC in the discharge tube inside it and to host a scroll wave. Scroll waves occur in ANY activated medium, work according to the Kreb’s cycle and can precipitate electrical activity, as with a heart beat. Scroll waves are studied primarily in chemical reactions and biology. The author contends that Scroll Waves and Krebs Cycles are universal and are, like gravity, epiphenomena of the transdimensional wave which is itself a scroll wave pinned to a given Whittaker structure. The IEC forms a beam from the injected electrons coming from the cathode. This beam is what pins the scroll wave. The beam is also the aether sink where the mass/energy is absorbed before going into the circuit.
What is happening in the discharge tube is loosely related to abnormal glow, electron avalanche, and multipactor phenomena. In those phenomena the electrodes are the fuel, in the case of the AIR it is CATIONIC OVERCHARGE that produces the secondary emissions. The secondary emissions come from space itself via the superelectron, via the nuclei, via the vacuum. The AIR is ultimately rectifying vacuum fluctuations, they are the “fuel”. The difference between classical and quantum states in the same system is the potential of the system. The vacuum energy sees the whole thing as an open path, sink or negative resistor. Once this energy transits into its electronic phase it is a “closed system”.
The IEC-Beam structure of the cold plasma in the discharge tube sets up a co-axial resonance (also produced in the load via the consonant discharge of the bipolar spark gap transistor).
Dark Energy (in the form of a vortex/scroll wave) has both a Collapsing/Aether phase and an Expansive/Electronic phase; the AIR encourages both to maintain its scroll wave.
The AIR uses a battery that never discharges but provides bias as the initial condition.
The DC current heterodyned over the permanent electrostatic charge is what induces a scroll wave in the scroll electret as well as injects electrons into the discharge tube, the electret-excited population inversion acts as a conductive conduit and as the injected electrons accelerate towards the anode they strip electrons out of the population inversion leaving behind holes causing the aforementioned secondary emissions.
The DC current diverges at the top of the tube, going into the tube and serially into the conductor of the scroll electret. The current then goes through a diode and then a capacitor bank where it then enters the base of the bipolar spark gap transistor. The function of this transistor is to automatically govern the divergent/convergent currents according to the load, which is parallel to the emitter and collector, and to maintain the scroll wave by collapsing the overall charge in the system. A consonant or simultaneous discharge across both gaps accentuates the Heaviside component present in the load; the Poynting component and Heaviside component will co-axially oscillate as opposed to transverse or longitudinal oscillation, as Bearden states, “it’s already a negative resistor”!
Therefore the AIR is auto-tuning. Excess energy is grounded or returned to the battery.
The author/inventor contends that the only reason this system can work as claimed is because it mimics the transdimensional mechanics of Dark Energy at more obvious ends of the scale as well as the hidden mechanics at the mesoscopic scale.
Companion Video – Sullivan Corollary: uk.youtube.com
Revised EM theory: cheniere.org, energyscience.org.uk
Closest Prior Art, The PAGD: aetherometry.com
Share this article with your friends:
|